fsi 140?3? d e fsi 120 03 g??t fsi?50 03 g? (1,00mm) .03937" optional alignment pins choice of board stacking profiles short version or optional threaded inserts www.samtec.com f-203-1 samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec israel tel: 972 3 648 7207 fax: 972 3 648 7214 samtec scandinavia tel: +46-84477280 fax: +46-87420413 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. surface smt mount one-piece interface fsi series note: some lengths, styles and options are non-standard, non-returnable. processing: max processing temp: 230 c for 60 seconds smt lead coplanarity: (0,10mm) .004" max (05-35) (0,15mm) .006" max (40-50) compression board: gold pads required suggested pcb layouts: for reference only. please contact samtec or go to www.samtec.com?fsi for recommended pcb layout. for complete specifications see www.samtec.com?fsi insulator material: liquid crystal polymer contact material: phosphor bronze current rating: 1a @ 80 ambient operating temp range: -65 c to +125 c plating: au over 50 " (1,27 m) ni (no. of positions x (1,00) .03937) + (0,76).030 (8,76) .345 (0,64) .025 typ (1,00) .03937 (0,36) .014 (0,89) .035 (6,37) .251 (0,15) .006 (3,00) .118 (1,40) .055 (1,07) .042 dia (1,40) .055 (no. of positions x (1,00) .03937) + (7,24) .285 (no. of positions x (1,00) .03937) + (14,10) .555 (no. of positions x (1,00) .03937) + (22,09) .870 (no. of positions/2 x (1,00) .03937) + (7,62) .300 at, ad & ab short version insert option (10, 20 & 30 pins/row) insert option (40 & 50 pins/row) (2,54) .100 dia (1,00) .03937 (9,00) .354 (0,61) .024 (4,11) .162 (2) (1,19) .047 dia b a (no. of positions x (1,00) .03937) + (15,24) .600 (no. of positions x (1,00) .03937) + (7,24) .285 40 & 50 ( e & m) dimensions not shown are same as above 10, 20 & 30 ( e & m) 05 thru 50 (non-threaded) a solder board (3,56) .140 mating board (1,14) .045 b (4,14) .163 (0,89) .035 fsi plating option pins per row 1 10, 20, 30, 40 & 50 (screw option) 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 (short version) d alignment option leave blank for no alignment pin at = alignment pin top side ab = alignment pin bottom side ad = alignment pin dual side insert option body height other option 03 = 3,00mm k = polyimide film pick & place pad tr = tape & reel packaging leave blank for short version (no screw down inserts or holes) e = #2-56 x 1/16" screw thread m = 2,00mm x 0,40mm screw thread g = 10 " (0,25 m) gold also available low profile see sei & sel series. (2,54mm) .100" pitch see sib series. specifications
|
